Chapter 1
Congratulations! You have purchased an advanced, flexible product
that incorporates the latest high speed digital telecommunications tech-
nology.
The product supports ISDN operation up to 128 Kbps, and includes a
handset port for voice calls over ISDN.
The ISDN TA is "Plug and Play" (PnP) compatible and software con-
figurable, so installation is fast and easy if you are using Windows 95,
Windows 3.1 or 3.11, or Windows NT 4.0 or higher.
Note:
You must be running Windows NT version 4.0 or higher and
a Plug and Play (PnP) BIOS in order to use these products
under Windows NT. To find out whether you have a PnP
BIOS, look for a PnP version number during startup or refer to
your computer documentation. You must also install a special
PnP driver from your NT installation CD. See Chapter 2.
Features
This product includes:
•
An ISDN terminal adapter card.
•
Built-in NT-1 termination (no additional hardware required for
normal ISDN installation).
•
On-board 16550 UART with local RAM buffers and support for 7
interrupts.
•
Standard AT command set for compatible with ISDN extensions
for maximum interoperability with all of your PC applications
software.
•
Standards-based solution through support of standard protocols:
V.110, V.120 Rate Adaptation up to 64 Kbps, Point-to-Point Pro-
tocol (PPP) at 64 Kbps, and Multilink PPP (ML-PPP) at 128 Kbps
using two channels.
•
Plug and Play compatibility support for easy installation for Win-
dows 95 users; PORTWIZ software card configuration for easy in-
stallation under Windows 3.1 and 3.11 systems.
6
Introduction
ISDN TA Owner's Manual
Need help?
Do you have a question about the ISDN TA and is the answer not in the manual?
Questions and answers