Table of Contents
Advertisement
5.
Connect the ISDN line. Plug the RJ-45 connector (the larger
end) of the RJ-11 to RJ-45 cord into the jack on the card marked
ISDN. Plug the RJ-11 connector of the cord into the ISDN wall
jack. You do not need an NT-1.
6.
Connect the Handset (optional). If a handset is included with
the product, plug the handset, or a headset or other handset (but
not a telephone), into the RJ-14 jack on the card marked
HANDSET. You may also use a standard hands-free headset.
The next diagram shows how all the connections should look.
Chapter 2 Installation
16-bit slot
13
Advertisement
Table of Contents
Need help?
Do you have a question about the ISDN TA and is the answer not in the manual?
Questions and answers