Using National Isdn 1 Switches; Using Northern Telecom Dms100 Switches; Using At&T Custom 5Ess Switch - Zoom ISDN TA Owner's Manual

Switch type to National ISDN 1:
Set Directory numbers:
Set Service Profile Identifiers (SPIDs):
Store settings and reset device:

Using Northern Telecom DMS100 Switches

Note: Refer to the ISDN Service Installation Flyer for your switch
type.
Restore factory defaults:
Set switch type to DMS100:
Set Directory numbers:
Set Service Profile Identifiers (SPIDs):
Store settings and reset device:
Using AT&T Custom 5ESS Switch
Note: Refer to the ISDN Service Installation Flyer for your switch
type.
Appendix E Setting Up ISDN Switches
AT&F
AT!C0=32 (This is the default)
AT!N1="[DN1]"
AT!N2="[DN2]"
AT!C2="[SPID1]"
AT!C6="[SPID2]"
AT&W
AT%Z1
AT&F
AT!C0=1
AT!N1="[DN1]"
AT!N2="[DN2]"
AT!C2="[SPID1]"
AT!C6="[SPID2]"
AT&W
AT%Z1
47