Zoom ISDN TA Owner's Manual page 23

Click Yes. Dial-up Networking displays the Remote Access
Service.
In the Remote Access Setup box select the device that most
closely matches the type of device and model you are installing
(for example, ISDN TA Internal) and click Continue for it to
automatically configure your setup.
If you don't have Remote Access Service installed you must do so to
use the Internet or other remote access servers. Refer to your Windows
NT user documentation for installation instructions.
Now install and set up your software. Follow the instructions in the
Quick Start guide or software user's manual that came with the soft-
ware. If you need additional help, see the section Tips for Selecting
Setup Options in the next chapter.
You may also want to review the section Using ML-PPP or PPP Con-
nections for Windows NT , which begins on page 32.
Chapter 2 Installation
Your hardware is installed!
23