Table of Contents
Advertisement
About This Guide
This manual is a guide for the installation of the ISDN Terminal
Adapter, referred to hereafter as the ISDN TA. Once you have success-
fully installed it in your IBM PC-compatible computer, virtually all
access to the product features is through easy to use point-and-click
software included with this product.
This guide is organized as follows:
Introduction (Chapter 1) describes the product and its features, talks
about the technology behind ISDN, and provides a brief explanation on
how you can take full advantage of the product's high-speed digital
capability.
Installation (Chapter 2) lists the items required for installation and
explains installation and configuration.
Configuration (Chapter 3) provides tips for setting up your communi-
cations software for ISDN lines.
Problems and Solutions (Chapter 4) provides troubleshooting infor-
mation.
The Appendixes provide additional information for a number of topics
including ISDN service, product specifications, and AT command
summaries.
Documentation Conventions
•
Commands and command examples described in this guide appear
in bold type. For example: To reset the ISDN TA, type ATZ and
press Enter.
We occasionally insert spaces between commands to make a command
line easier to read. You can type the command line with or without
spaces between commands as long as the command line does not ex-
ceed 255 characters (spaces count as characters).
•
The letter O is shown in lower case (o
number zero is shown as 0.
About This Guide
or
o
)
in a command line. The
5
Advertisement
Table of Contents
Need help?
Do you have a question about the ISDN TA and is the answer not in the manual?
Questions and answers