Bluetooth
®
USB Adapter/PC Card Quick Start Guide
Setup for Windows XP/2000/Me/98SE
1.
Do not plug the Bluetooth device into your computer yet. You need to install
the software first.
2.
Insert the installation CD into the CD drive. The CD should start
automatically and the Language Selection screen should appear. (If it does
not, double-click the My Computer icon on your desktop and then, in the
My Computer window, double-click the Zoom icon.)
3.
In the Language Selection window, choose your language.
4.
In the next window, select Installation Wizard then choose the name of
your Bluetooth device.
5.
Follow the prompts to install the software. Note: You can accept the
licensing agreement when prompted.
6.
Windows XP/2000 users only: If the Driver Signature Notice message
box appears, click OK.
7.
When prompted, plug the Bluetooth device into your computer. (If you are
using the USB Adapter, you may find it helpful to connect the supplied USB
cable between the USB Adapter and the USB port.) Then click OK to
continue the installation.
8.
When the installation is complete, click Finish, then Yes. Your computer will
shut down and restart.
9.
To use your Bluetooth USB Adapter or PC Card with another Bluetooth
device, you need to set up the service for that device using the Bluetooth
Settings. See the Bluetooth User Guide on the installation CD for directions.
Setup for Macintosh (For USB Adapter only)
For Mac OS X (10.3 and later), you do not need to install any software. To install
the Bluetooth USB Adapter, plug the Adapter into your computer's USB port. (If
Need help?
Do you have a question about the 4312AF and is the answer not in the manual?
Questions and answers