Chapter 2 Installation; What You Need To Install The Isdn Ta - Zoom ISDN TA Owner's Manual

Terminal adapter

Hide thumbs Also See for ISDN TA:

Owner's manual (63 pages)

Table Of Contents

Table of Contents

Chapter 2

This chapter describes installation in computers running either Win-

dows 95 , Windows 3.1 or 3.11, or Windows NT. If you are installing

your TA in a computer running Windows NT 4.0, please follow the

instructions below before installation.

Your computer should be located near an ISDN jack.

Special Instructions for Windows NT 4.0

While Microsoft has not formally implemented Plug and Play for Win-

dows NT 4.0, the installation CD-ROM for both the Workstation and

the Server version of the operating system contains a special driver that

will enable Plug and Play. You must install this special driver before

installing your ISDN TA.

Follow these steps to install the driver:

Insert your installation disc into your CD-ROM drive. If Auto-

Play is activated, you will need to click on the Browse button.

Navigate to the following subdirectory: Drivelib\Pnpisa\X86.

Find the following file and click on it with your secondary

mouse button (usually the right button): Pnpisa.inf.

When the pop-up menu appears, select Install. The Plug and

Play driver will be installed on your hard drive.

Remove your installation disc and put it in a safe place.

What You Need to Install the ISDN TA

Make sure that you have received the following items:

•

Your ISDN TA.

•

An RJ-11 to RJ-45 phone cord (with a small plastic plug on one

end and a large plastic plug on the other) to connect the TA to the

ISDN (digital) wall jack.