Using Ml-Ppp Connections In Windows 3.1 Or 3.11; Using Ml-Ppp And Ppp Connections In Windows Nt - Zoom ISDN TA Owner's Manual

Since ML-PPP uses two phone numbers to set up connections on both
B-channels enter the two phone numbers separated by an ampersand &.
For example, if your provider's two phone numbers are 555-1234 and
555-2345, you would enter
Note that if both numbers are the same you need to enter the same
number twice:
Note also that if you must make a long-distance call for your connec-
tion, both numbers must include the 1 prefix, and if the first number
requires an area code, so will the second. For example:

Using ML-PPP and PPP Connections in Windows NT

Use the following example for setting up ML-PPP and PPP for local
and long distance calls.
Example:
To input ML-PPP and PPP AT commands:
1. Open Modems under the Control Panel. Under Modem Proper-
ties select the device that most closely matches the type of device
and model you are installing (for example, ISDN TA Internal).
2. Click Properties.
3. Under the Connection tab click Advanced. Under Extra Set-
tings:
For PPP type:
For ML-PPP type:
4. Click OK and close out of Modem Properties.
To set up phone numbers:
1. Open Dial-Up Networking under My Computer.
2. Click New.
32
5551234 & 5552345
5551234 & 5551234
16175551234 & 16175552345
How to configure a dial-up networking utility for an
ML-PPP or PPP connection in Windows NT.
%A2=5%B39 S7=55
%A2=6%B39 S7=55
ISDN TA Owner's Manual