Zoom ISDN TA Owner's Manual page 29

9. In the next dialog box enter the telephone number you want to dial
through Dial-Up Networking dialog box.
Since ML-PPP uses two phone numbers to set up connections on
both B-channels you must enter the two phone numbers separated
by an ampersand &. The two numbers may be the same number
repeated. If the numbers you are dialing require an area code or
country code, include the area or country code, and an initial 1 or
011 if necessary, for each number.
Note: See the following examples, Example A (for local calls) and
Example B (for long- distance calls), for setting up ML-PPP
and PPP numbers. After reviewing these examples continue
on to step 10.
Example A:
Your local area code is (123).
a) Leave the area code text box blank.
b) In the telephone number text box type 1 plus the area code, for
example:
and press Enter. You only need to add the 1 and area code for
the first number.
c) Click Next, then Finish.
d) Go to Step 10 below.
Example B:
a) Leave the area code text box blank.
b) In the telephone number text box type 1 plus the area code, for
example:
11345554321&11345554321
and press Enter.
Note that you must enter the 1 and the area code again after the
&.
c) Click Next, then Finish.
Chapter 3 Software Configuration
How to use ML-PPP to connect to local numbers
555-1234 and 555-2345 in Windows 95.
11235551234&5552345
How to use ML-PPP to connect to long-distance
numbers (134) 555-4321 and (134) 555-4321 (the
same number twice) in Windows 95.
29