Agilent Technologies HP 16500B Manual page 193

PORTEDGE
Command :PORTEDGE <edge_spec>
The PORTEDGE command sets the port input BNC to respond to either a
rising edge of falling edge for a trigger from an external source. The
threshold level of the input signal is set by the PORTLEV command.
A 1 or ON for rising edge or a 0 or OFF for falling edge.
<edge_spec>
Example
OUTPUT 707;":INTERMODULE:PORTEDGE 1"
Query
:PORTEDGE?
The PORTEDGE query returns the current edge setting.
Returned Format
[:INTermodule:PORTEDGE] {1|0}<NL>
Example
OUTPUT XXX;":INTERMODULE:PORTEDGE?"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
INTermodule Subsystem
PORTEDGE
12–9