Agilent Technologies HP 16500B Manual page 134

MENU
Command :MENU <module>[,<menu>]
The MENU command puts a menu on the display. The first parameter
specifies the desired module. The optional second parameter specifies the
desired menu in the module (defaults to 0). Table 9-5 lists the module
parameters. The mainframe menus and their parameters are listed in table
9-6.
Selects module or system. An integerfrom –2 through 5 for HP 16500B only
<module>
or an integer from –2 through 10 with an HP 16501A connected.
Selects menu (integer)
<menu>
Example
OUTPUT XXX;":MENU 0,1"
Table 9-5 First Parameter Values
Parameter
0
1
2
3
4
5
–1
–2
Available when an HP 16501A is connected:
6
7
8
9
10
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Menu
System/Intermodule
Module in slot A
Module in slot B
Module in slot C
Module in slot D
Module in slot E
Software option 1
Software option 2
Module in slot F
Module in slot G
Module in slot H
Module in slot I
Module in slot J
Mainframe Commands
MENU
9–15