INTermodule Subsystem
INSert
INSert
Command
:INSert {<module>|OUT},{GROUP|<module>}
The INSert command adds PORT OUT to the Intermodule configuration. The
first parameter selects the module or PORT OUT to be added to the
intermodule configuration, and the second parameter tells the instrument
where the module or PORT OUT will be located. 1 through 5 corresponds to
the slot location of the modules A through E for the HP 16500B alone and 1
through 10 corresponds to slot loction of modules A through J when an HP
16501A is connected.
An integer, 1 through 5 for HP 16500B alone. 1 through 10 with the HP
<module>
16501A connected.
Examples
OUTPUT XXX;":INTERMODULE:INSERT 1,GROUP"
OUTPUT XXX;":INTERMODULE:INSERT 2,GROUP"
OUTPUT XXX;":INTERMODULE:INSERT 3,2;INSERT OUT,2"
The following figure shows the result of the example output commands:
12–8
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Group Run
A
B
C
OUT