Agilent Technologies HP 16500B Manual page 138

RMODe
Command :RMODe {SINGle|REPetitive}
The RMODe command specifies the run mode for the selected module (or
Intermodule). If the selected module is in the intermodule configuration,
then the intermodule run mode will be set by this command.
After specifying the run mode, use the STARt command to start the acquisition.
Example
OUTPUT XXX;":RMODE SINGLE"
Query :RMODe?
The query returns the current setting.
Returned Format
[:RMODe] {SINGle|REPetitive}<NL>
Example
OUTPUT XXX;":RMODE?"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Mainframe Commands
RMODe
9–19