Agilent Technologies HP 16500B Manual page 135

Mainframe Commands
MESE<N> (Module Event Status Enable)
Table 9-6 System Menu Values
Menu Command Parameters
MENU 0,0
MENU 0,1
MENU 0,2
MENU 0,3
MENU 0,4
MENU 0,5
Query
:MENU?
The MENU query returns the current menu selection.
Returned Format
[:MENU] <module>,<menu><NL>
Example
OUTPUT XXX;":MENU?"
MESE<N> (Module Event Status Enable)
Command
:MESE<N> <enable_value>
The MESE command sets the Module Event Status Enable register. This
register is the enable register for the MESR register. The <N> index
specifies the module, and the parameter specifies the enable value. For the
HP 16500B alone, the <N> index 0 through 5 refers to system and modules 1
through 5 respectively. With an HP 16501A connected, the <N> index 6
through 10 refers to modules 6 through 10 respectively. Table 9-7 lists the
Module Event Status Enable register bits, bit weights, and what each bit
masks for the mainframe.
An integer 0 through 10
<N>
An integer from 0 through 255
<enable_value>
Example
OUTPUT XXX;":MESE1 3"
9–16
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Menu
System Configuration menu
Hard disk menu
Flexible disk menu
Utilities menu
Test menu
Intermodule menu