Subsystems - Agilent Technologies HP 16500B Manual

Programming and Documentation Conventions

Subsystems

The commands are shown in the long form and short form using upper and
lowercase letters. As an example, AUToload indicates that the long form of
the command is AUTOLOAD and the short form of the command is AUT.
Each of the commands contain a description of the command, its arguments,
and the command syntax.
Subsystems
There are three subsystems in the mainframe. In the command tree (figure
4-1) they are shown as branches, with the node above showing the name of
the subsystem. Only one subsystem may be selected at a time. At power on,
the command parser is set to the root of the command tree; therefore, no
subsystem is selected. The three subsystems in the HP 16500B Logic
Analysis System are:
•
SYSTem - controls some BASIC functions of the instrument.
•
MMEMory - provides access to the internal disk drive.
•
INTermodule - provides access to the Intermodule bus (IMB).
4–10
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com