Agilent Technologies HP 16500B Manual page 169

COPY
Command :MMEMory:COPY <name>[,<msus>],<new_name>[,<msus>]
The COPY command copies one file to a new file or an entire disk's contents
to another disk. The two <name> parameters are the filenames. The first
pair of parameters specifies the source file which must reside in the present
working directory. The second pair specifies the destination file. An error is
generated if the source file doesn't exist, or if the destination file already
exists.
A string of up to 10 alphanumeric characters for LIF in the following form:
<name>
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN when the file resides in the present working directory
or
\NAME_DIR\FILENAME when the files does not reside in the present
working directory
A string of up to 10 alphanumeric characters for LIF in the following form:
<new_name>
NNNNNNNNNN
or
A string of up to 64 alphanumeric characters for DOS in one of the following
forms:
NNNNNNNN.NNN when the file resides in the present working directory
or
\NAME_DIR\FILENAME when the files does not reside in the present
working directory
Mass Storage Unit specifier. INTernal0 for the hard disk drive and
<msus>
INTernal1 for the flexible disk drive.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
MMEMory Subsystem
COPY
11–11