Agilent Technologies HP 16500B Manual page 173

LOAD [:CONFig]
Command :MMEMory:LOAD[:CONfig] <name>[,<msus>][,<module>]
The LOAD command loads a configuration file from the disk into the
modules, software options, or the system. The <name> parameter specifies
the filename from the disk. The optional <module> parameter specifies
which module(s) to load the file into. The accepted values are –2 through
10. Not specifying the <module> parameter is equivalent to performing a
'LOAD ALL' from the front panel which loads the appropriate file for both the
system and the modules, and any software option.
A string of up to 10 alphanumeric characters for LIF in the following form:
<name>
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN when the file resides in the present working directory
or
\NAME_DIR\FILENAME when the files does not reside in the present
working directory
Mass Storage Unit specifier. INTernal0 for the hard disk drive and
<msus>
INTernal1 for the flexible disk drive.
An integer, –2 through 5 for the HP 16500B alone. –2 through 10 with the HP
<module>
16501A connected.
Examples
OUTPUT XXX;":MMEMORY:LOAD:CONFIG 'FILE
OUTPUT XXX;":MMEMORY:LOAD 'FILE
OUTPUT XXX;":MMEM:LOAD:CONFIG 'FILE A',INTERNAL0,1"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
MMEMory Subsystem
LOAD [:CONFig]
'"
',0"
11–15