Agilent Technologies HP 16500B Manual page 118

*WAI (Wait)
Command *WAI
The *WAI command causes the device to wait until completing all of the
overlapped commands before executing any further commands or queries.
An overlapped command is a command that allows execution of subsequent
commands while the device operations initiated by the overlapped command
are still in progress. Some examples of overlapped commands for the
HP 16500B are STARt and STOP.
Example:
OUTPUT XXX;"*WAI"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Common Commands
*WAI (Wait)
8–19