Agilent Technologies HP 16500B Manual page 116

Table 8-6 The Status Byte Register
Bit Position
7
6
5
4
3
2
1
0
0 = False = Low
1 = True = High
*TRG (Trigger)
Command *TRG
The *TRG command has the same effect as a Group Execute Trigger (GET).
That effect is as if the START command had been sent for intermodule group
run. If no modules are configured in the Intermodule menu, this command
has no effect.
Example
OUTPUT XXX;"*TRG"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Bit Weight Bit Name
128
64 MSS
32 ESB
16 MAV
8 LCL
4
2
1 MSB
Common Commands
*TRG (Trigger)
Condition
0 = not Used
0 = instrument has no reason for service
1 = instrument is requesting service
0 = no event status conditions have occurred
1 = an enabled event status condition has occurred
0 = no output messages are ready
1 = an output message is ready
0 = a remote-to-local transition has not occurred
1 = a remote-to-local transition has occurred
not used
not used
0 = a module or the system has activity to report
1 = no activity to report
8–17