Agilent Technologies HP 16500B Manual page 175

MKDir (Make Directory)
Command :MMEMory:MKDir <directory_name> [,<msus>]
The MKDir command allows you to make a directory on the hard drive and a
DOS disk in the flexible drive. Directories cannot be made on LIF disks.
Make directory will make a directory under the present working directory on
the current drive if the optional path is not specified. Separators can be
either the slash (/) or backslash (\) character. Both the slash and backslash
characters are equivalent and are used as directory separators. The string
containing two periods (..) represents the parent of the present working
directory.
<directory String of up to 64 characters for DOS disks ending in the new directory name.
_name>
Mass Storage Unit specifier. INTernal0 for the hard disk drive and
<msus>
INTernal1 for the flexible disk drive.
Examples
OUTPUT XXX;":MMEMORY:MKDIR 'NEW.DIR'"
OUTPUT XXX;":MMEM:MKD '\SYSTEM\NEW.DIR',INT0 "
The slash (/) character in DOS path names will be automatically translated to
the backslash character (\) on the disk; therefore, any flexible DOS disk used in
the HP 16500B will be compatible in DOS computers.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
MMEMory Subsystem
MKDir (Make Directory)
11–17