Agilent Technologies HP 16500B Manual page 145

Mainframe Commands
XWINdow
XWINdow
Command :XWINdow {OFF|0}
:XWINdow {ON|1}[,<display name>]
The XWINdow command opens or closes a window on an X Window display
server, that is, a networked workstation or personal computer. The
XWINdow ON command opens a window. If no display name is specified, the
display name already stored in the HP 16500B X Window configuration menu
is used. If a display name is specified, that name is used. The specified
display name also is stored in non-volatile memory in the HP 16500B.
A string containing an Internet (IP) Address optionally followed by a display
<display name>
and screen specifier. For example,
"12.3.47.11"
or
"12.3.47.11:0.0"
Examples
To open a window, specifying and storing the display name:
OUTPUT XXX;":XWINDOW ON,'12.3.47.11'"
To open a window, using the stored display name:
OUTPUT XXX;":XWINDOW ON"
To close the X Window:
OUTPUT XXX;":XWINDOW OFF"
9–26
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com