Agilent Technologies HP 16500B Manual page 151

SYSTem Subsystem
DSP (Display)
Query
:SYSTem:DATA?
The SYSTem:DATA query returns the block data. The data sent by the
SYSTem:DATA query reflects the configuration of the a selected module
when the last acquisition was performed. Any changes made since then
through either front-panel operations or programming commands do not
affect the stored data. Since the mainframe does not acquire data, refer to
the appropriate module Programmer's Guide for more details.
Returned Format
[:SYSTem:DATA] <block_data><NL>
Example See the Programmer's Guide for the selected module for an example.
DSP (Display)
Command
:SYSTem:DSP <string>
The DSP command writes the specified quoted string to a device-dependent
portion of the instrument display.
A string of up to 68 alphanumeric characters
<string>
Example
OUTPUT XXX;":SYSTEM:DSP 'The message goes here'"
10–6
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com