Agilent Technologies HP 16500B Manual page 174

MMEMory Subsystem
LOAD :IASSembler
LOAD :IASSembler
Command :MMEMory:LOAD:IASSembler <IA_name>[,<msus>],{1|2}
[,<module>]
This variation of the LOAD command allows inverse assembler files to be
loaded into a module that performs state analysis. The <IA_name>
parameter specifies the inverse assembler filename from the desired
<msus>. The parameter after the optional <msus> specifies which machine
to load the inverse assembler into. For example, a 1 following <msus>
specifies that the inverse assembler files will be loaded into MACHINE 1 of
the specified module.
The optional <module> parameter is used to specify which slot the state
analyzer is in. If this parameter is not specified, the state analyzer in the
currently selected module will be loaded with the inverse assembler file.
A string of up to 10 alphanumeric characters for LIF in the following form:
<IA_name>
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN when the file resides in the present working directory
or
\NAME_DIR\FILENAME when the files does not reside in the present
working directory
Mass Storage Unit specifier. INTernal0 for the hard disk drive and
<msus>
INTernal1 for the flexible disk drive.
An integer, 1 through 5 for the HP 16500B alone. 1 through 10 with an HP
<module>
16501A connected.
Examples
OUTPUT XXX;":MMEMORY:LOAD:IASSEMBLER 'I68020 IP',1"
OUTPUT XXX;":MMEM:LOAD:IASS 'I68020 IP',INTERNAL0,1,2"
11–16
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com