Agilent Technologies HP 16500B Manual page 189

DELete
Command :DELete {ALL|OUT|<module>}
The DELete command is used to delete a module, PORT OUT, or an entire
intermodule tree. The <module> parameter sent with the delete command
refers to the slot location of the module.
An integer, 1 through 5 for HP 16500B alone. 1 through 10 with the HP
<module>
16501A connected.
Example
OUTPUT XXX;":INTERMODULE:DELETE ALL"
OUTPUT XXX;":INTERMODULE:DELETE 1"
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
INTermodule Subsystem
DELete
12–5