Agilent Technologies HP 16500B Manual page 155

SYSTem Subsystem
PRINt
PRINt
Commands :SYSTem:PRINt ALL[,DISK, <pathname>[,<msus>]]
:SYSTem:PRINt PARTial,<start>,<end>
[,DISK, <pathname>[,<msus>]]
:SYSTem:PRINt SCReen[,DISK, <pathname> [,<msus>],
{BTIF|CTIF|PCX|EPS}]
The PRINt command initiates a print of the screen or listing buffer over the
current PRINTER communication interface to the printer or to a file on the
disk. The PRINT SCREEN option allows you to specify a graphics type. The
BTIF option formats the screen data in black-and-white TIF. The CTIF and
PCX options format the data in color TIF and color PCX respectively. EPS
specifies Encapsulated PostScript format.
If a file name extension is not specified in the command, the correct
extension will be appended to the file name automatically. The file name
extension is TIF for both BTIF and CTIF options and PCX is the extension for
the PCX option.
The PRINT PARTial command is valid in certain listing menus. It allows you
to specify a starting and ending state number so you can print a portion of
the listing to the printer or to a disk file.
A string of up to 10 alphanumeric characters for LIF in the following form:
<pathname>
NNNNNNNNNN
or
A string of up to 64 alphanumeric characters for DOS in one of the following
forms:
NNNNNNNN.NNN when the file resides in the present working directory
or
\NAME_DIR\FILENAME when the files does not reside in the present
working directory
Mass Storage Unit specifier. INTernal0 for the hard disk drive and
<msus>
INTernal1 for the flexible disk drive.
An integer specifying a state number.
<start>
<end>
10–10
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com