Agilent Technologies HP 16500B Manual page 197

Query
:TREE?
The TREE? query returns a string that represents the intermodule tree. A −1
means the module is not in the intermodule tree, a 0 value means the module
is armed from the Intermodule run button (Group run), and a positive value
indicates the module is being armed by another module with the slot location
1 to 10. 1 through 10 corresponds to the slots A through J.
Returned Format
[INTermodule:TREE] <module>,<module>,<module>,<module>,
<module><NL>
Example
OUTPUT XXX;":INTERMODULE:TREE?"
TTIMe
Query :TTIMe?
The TTIMe query returns five values (HP 16500B alone) representing the
absolute intermodule trigger time for all of the modules in the Intermodule
configuration. When an HP 16501A is connected, the TTIMe query returns
10 values. The first value is the trigger time for the module in slot A, the
second value is for the module in slot B, the third value is for slot C, etc.
The value 9.9E37 is returned when:
•
•
•
The trigger times returned by this command have already been offset by the
INTermodule:SKEW values and internal hardware skews (INTermodule:HTIMe).
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
No module is installed in the corresponding slot;
The module in the corresponding slot is not time correlated; or
A time correlatable module did not trigger.
INTermodule Subsystem
TTIMe
12–13