Install Bottom Strike - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (cont .)
g

Install Bottom Strike

1. Close door and mark location of bottom bolt.
2. Open door and place strike over bottom bolt location.
3. Mark location of bottom strike pocket and hole locations. (Figure 7)
Note:
Strike is not symmetric. Install as shown. If needed, strike can be rotated later to increase bolt clearance.
(Figure 8)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Narrow
Wide
Bottom Strike Pocket
3/8" MAX
Bottom of door
to floor.
Figure 7
Door Swing
Figure 8
8
Jamb
FM440 03/20