Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual page 16

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
4 Optional Installation (cont .)
a Dogging Indicator Installation (cont .)
Install indicator on inside of door using supplied 10-24 x 2" oval head screws. Make sure control fingers
grab top rod pin as shown. (Figure 32)
Check for proper operation. Rotate lever until indicator window shows a single latch point. (Figure 33)
Note:
To dog top and bottom latches in a retracted state, fully rotate lever and move indicator slider to the left.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Control Fingers
Pin
Figure 32
Single Latch 3-Latch
Point Points
Indicator
Window
Figure 33
Side View
16
FM440 03/20