FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3
Installation (cont .)
d
Install Center Strike Into Door Frame
Install two (2) ¼-20 socket cap flat head screws. (Figure 3)
e
Remove Retractor Inserts
WARNING:
The door now has ability to latch. (Figure 4)
f
Check Latches (Uninstalled)
1. Insert uninstalled outside mortise trim and
rotate to verify top and bottom latches retract
flush with door. Do not install mortise trim at
this time. (Figure 5)
2. Move top strike back and forth until top latch engages strike. (Figure 6)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
TOP OF DOOR FRAME
Figure 4
Figure 6
7
Figure 3
Figure 5
FM440 03/20