Addendum; Check Door; Place Door Horizontal On Sawhorse - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
5

Addendum

This addendum is to be used as a reference for pre-installed hardware (latches and cassette). The
following steps are for ease of reference as they have been completed in advance by the door
manufacturer.
a

Check Door

Verify the door is:
• Correct size and hand for opening.
• Correctly prepared to Template 4740. (Figure 34)
IMPORTANT:
If measurement is incorrect, DO NOT PROCEED
WITH INSTALLATION. Contact door manufacturer.
b

Place Door Horizontal on Sawhorse

(Figure 35)
Note:
Orient the door face holes on top.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
39-9/16"
(101.4 cm)
Figure 35
17
Outswing Door
Shown
L C
of Lockbody
± 5/64"
Door Width
Figure 34
FM440 03/20