FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3
Installation
a
Check Door
Verify door is:
• Correct size and hand for opening.
• Correctly prepared to Template 4740.
IMPORTANT:
If measurement is incorrect, DO NOT PROCEED
WITH INSTALLATION. Contact door manufacturer.
(Figure 1)
b
Door Installation
Hang door on frame.
IMPORTANT:
If door rubs along floor, DO NOT PROCEED WITH
INSTALLATION. Contact door manufacturer.
c
Install Top Strike Into Door Frame
• Remove the strike filler plate and screws and discard.
• Install four (4) #12-24 socket cap flat head screws. (Figure 2)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
39-9/16"
X
(101.4 cm)
Figure 2
6
Outswing Door
Shown
L C
of Lockbody
± 5/64"
Figure 1
FM440 03/20