Troubleshoot Latch Installation; Correct Rod Installation Check - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
5 Addendum (cont .)
g

Troubleshoot Latch Installation

• If the latch will not fully seat in
the door, rod or rod guide is
not aligned properly with
LBC gear. (Figure 42)
x
✓
h

Correct Rod Installation Check

• Be certain a portion of the red end of the rod can be seen in the LBC viewing window and set screw is
in the location shown. (Figure 43)
✓
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Rod
Set Screw
x
Rod Guide
REPEAT:
Step 6E to align.
Rod Guide
Figure 42
✓
Viewing
Window
x x
Figure 43
20
Misaligned
Rod Guide
REPEAT:
Step 6E to align.
✓
Aligned
x
FM440 03/20