Electronic Access Control (Eac) Shield (If Applicable); Optional Installation; Dogging Indicator Installation - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (cont .)
n

Electronic Access Control (EAC) Shield (if applicable)

1. Install shield (provided) over inside controller. (Figure 28)
2. Drill and tap door for #8-32 machine screws (provided).
IMPORTANT:
Shield MUST be centered on controller.
4

Optional Installation

a

Dogging Indicator Installation

1. Ensure door is latched and all bolts are projected.
2. Place plastic field template on pin in top rod through oval cut-out in door. (Figure 29)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Front View
Note:
Slots face up.
Figure 28
Side View
Pin
Figure 29
14
FM440 03/20