Bottom Latch Installation; Check Latch - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
5 Addendum (cont .)
k

Bottom Latch Installation

REPEAT
Steps 5e through 5k to install bottom latch.
(Figure 47)
l

Check Latch

• Remove the bolt retainer clips from
the top and bottom latch assemblies.
(Figure 48)
• Insert mortise trim in the door prep
and cassette and rotate to verify latches
fully retract (Figure 49). Confirm the set
screw moves from circle to circle in the
LBC viewing window (Figure 50). Do not
install the mortise lock at this time.
Note:
Push the black plunger on the top latch
to project bolts. (Figure 51)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 49
Figure 50
Figure 51
Figure 47
Figure 48
Plunger
22
FM440 03/20