1
: Push the blower housing (1) with
the lower anti-vibration springs
into the spring seats (arrow) until
they snap into position.
1
: Fit and tighten down the
screws (1) firmly.
1
: Push the blower housing (1) with
the upper anti-vibration springs
into the spring seats (arrow) until
they snap into position.
98
Versions with long back padding
1
: Fit and tighten down the
screws (1) firmly.
1
1
: Fit the back padding (1) in
position.
: Insert the screws (arrows) and
tighten them down firmly.
Versions with short back padding
1
2
1
: Fold down the back padding (1).
: Fit and tighten down the
screws (2) firmly.
– Reassemble all other parts in the
reverse sequence.
10.9
Nozzle / Valve
10.9.1 Nozzle
1
: Use a screwdriver to ease the
hose clamp (arrow) open.
– Pull off the hose (1).
2
SR 430, SR 450