1
: Fit and tighten down the
screws (1) firmly.
Versions with long back padding
1
: Fit and tighten down the
screws (1) firmly.
SR 430, SR 450
Version without pressure pump
1
– Push on the hose (1) and plug (2)
as far as stop.
: Fit the hose clamp and squeeze
the tabs (arrow) together until
they engage.
1
: Fit and tighten down the hose
clamp (3).
Version with pressure pump
– Push home the hoses (1) as far
as stop.
: Fit and tighten down the hose
clamps (2).
– Reassemble all other parts in the
reverse sequence.
10.4
– Remove the metering unit,
3
2
1
– Remove the cable from
2
2
1
: Take out the screw (1) and lift the
1
: Disconnect the cable (1) from the
– Remove the cover (2).
Cable, SR 450
b 10.3
the metering lever, b 8.5
3
cover (2).
guide (arrow).
1
2
1
87