Stihl SR 430 Manual page 95

1
: Fit the hose (1) in the
guide (arrow).
Version with pressure pump
1 2
: Push the hose (1) onto the stub.
– Tighten down the hose clamp (2)
firmly.
SR 430 versions with and without
pressure pump
1
: Push the blower housing (1) with
the anti-vibration springs into the
lower spring seats (arrow) until
they snap into position.
94
1
: Insert and tighten down the
screws (1) on the underside of
the machine.
Version without pressure pump
2
: Pull off the hose (1) and molded
hose (2).
: Squeeze the tabs (arrow) of the
hose clamp together until they
engage.
Version with pressure pump
3 3
2
1
: Fit the hoses (1) and molded
hose (2).
: Fit and tighten down the hose
1
clamps (3).
SR 430 versions with and without
pressure pump
1
: Push the blower housing (1) with
the upper anti-vibration springs
into the spring seats (arrow) until
they snap into position.
1
Versions with long back padding
1
: Fit and tighten down the
screws (1) firmly.
1
1
SR 430, SR 450