9.12.1 Fuel Tank Cap - Stihl SR 430 Manual

Installing
– Coat the connector with STIHL
press fluid, b 13
: Line up the connector (1) with
fuel hoses and push it into the
bore until the tab engages the
recess (arrow) and locates
against the housing.
1
: Fit the fuel hoses (1) in the
guide (arrow).
SR 430, SR 450
1
2
– Position the fuel tank (1) so that
the holes (arrows) are in
alignment.
: Fit and tighten down the
screws (2) firmly.
1
: Position the fuel hoses (1) kink-
free on the fuel tank.
– Reassemble all other parts in the
reverse sequence.

9.12.1 Fuel Tank Cap

1
See instruction manual.
– Open the tank cap.
2
: Disconnect the tank cap cord's
nipple from the slot (arrow) inside
1
the tank.
– Inspect the tank cap. Install new
sealing ring or tank cap if
necessary.
– Reassemble in the reverse
sequence.
1
– Check for leaks.
81