Blower Housing, Sr - Stihl SR 430 Manual

1
: Fit the back padding (1) in
position.
: Insert the screws (arrows) and
tighten them down firmly.
Versions with short back padding
2
1
: Fold down the back padding (1).
: Fit and tighten down the
screws (2) firmly.
– Reassemble all other parts in the
reverse sequence.
SR 430, SR 450
10.8 Blower Housing,
SR 450
– Remove the metering unit,
b 10.3
– Remove the short circuit wire,
b 5.6.2
– Remove the filter housing, b 9.4
– Remove the fuel tank, b 9.12
– Pull the fuel hoses out of the
guides.
– Remove the short circuit wire
from the blower housing,
b 5.6.2
2
Versions with long back padding
1
: Take out the screws (arrows).
: Remove the back padding (1).
1
: Take out the screws (1).
Versions with short back padding
2
1
: Fold down the back padding (1).
: Take out the screws (2).
1
: Remove the screws (1) from the
underside of the machine.
1
2
1
95