Blower Wheel - Stihl SR 430 Manual

: Insert the screws (arrows) and
tighten them down firmly.
1
2
: Fit the hoses (1).
– Fit and tighten down the hose
clamps (2).
1 2
: Fit the hose (1) (control handle).
– Fit and tighten down the hose
clamp (2).
90
1
: Fit the hose (1) in the
guide (arrow).
– Reassemble all other parts in the
reverse sequence.
1
10.6

Blower Wheel

2
– Remove the blower housing,
SR 430 b 10.7,
SR 450 b 10.8
– Remove the metering unit,
SR 450 b 10.3
1
: Take out the screws (arrows).
– Remove the outer blower
housing (1) – on versions with a
pressure pump, leave the pump
mounted in position.
– Remove the blower tube – see
instruction manual.
1
: Use locking strip (1)
0000 893 5904 to block the
piston .
: Unscrew the blower wheel
nut (arrow).
SR 430, SR 450