Cylinder / Crankshaft - Stihl SR 430 Manual

1
The wiring harness (1) must be in
the guide (arrow).
2
1
: Connect the ground wire (2) and
short circuit wire (1) – make sure
the connectors are pushed fully
home.
– Reassemble all other parts in the
reverse sequence.
22
4.6

Cylinder / Crankshaft

– Remove the engine, b 4.5
2
3
– Remove the muffler (1), b 4.1
– Remove the ignition module (2),
b 5.2
– Remove the flywheel (3), b 5.5
: Take out the screws (arrows).
1
1
: Pull off the engine pan (1).
Do not use pointed or sharp-edged
tools for this job.
: Release the crankshaft (1) from
its bearing seats (arrows) and
pull it carefully out of the cylinder.
1
: Pull off the oil seals (1).
1
1
SR 430, SR 450