Squeezing And Locking The Spray Gun Trigger; Adjusting Operating Pressure And Flow Rate Of; Plant Protection Product; Adjusting The Nozzle - Stihl SGA 85 Instruction Manual

English

12.4 Squeezing and locking the spray gun trigger

Pressing the spray gun trigger
1
► Slide the retaining latch (1) to the
► Pull the trigger (2) and hold it there.
Plant protection product flows out of the nozzle.
Locking the spray gun trigger
1
► Release the trigger (2).
Plant protection product no longer flows out ot the nozzle.
The sprayer is still switched on.
► Slide the retaining latch (1) to the
48
2
position.
2
position.

12.5 Adjusting Operating Pressure and Flow Rate of

Plant Protection Product

1
To increase operating pressure and flow rate of plant
protection product
► Turn rotary control (1) in direction of "Max".
To reduce operating pressure and flow rate of plant
protection product
► Turn rotary control (1) in direction of "Min".
Operating pressure is indicated on the spray gun's gauge
(2).

12.6 Adjusting the Nozzle

The flow rates are specified in the technical data, @ 19.2.
A
Setting the full cone beam (A)
► Turn the nozzle counterclockwise as far as stop.
12 Using the Sprayer
2
B
0458-600-9821-A