Stihl SR 430 Manual page 105

1
: Pull the protective screen (1) out
of the slots (arrows).
– Inspect clamping strap and
transfer if necessary.
– Inspect harness straps and
transfer if necessary, b 11.3
1
: Push the clamping strap (1)
through the loop (arrow) and
remove it.
104
Installing
1
: Pass the clamping strap (1)
around the seat and through the
loop (arrow).
: Push lugs into the slots (arrows).
1
: Place the protective screen (1) in
position so that the lugs (arrow)
are above the first web.
1
: Push the spring seats (1) into the
seats (arrow).
: Push the protective screen (1)
into position until it snaps into
place.
– Install the blower housing,
b 10.8
– Reassemble all other parts in the
reverse sequence.
SR 430, SR 450
1