Stihl SR 430 Manual page 97

1
– Hold the protective screen
steady.
: Pull the blower housing (1) away
from the backplate until the upper
AV springs come out of their
seats (arrow)
– hold the blower housing (1).
1
: Pull off the blower housing (1).
– The lower AV springs are pulled
out of their seats (arrow) at the
same time.
1
: Pull the hose (1) out of the
guide (arrow).
96
1
: Remove the gasket (1).
1
3
: Take out the screw (1).
: Remove the antistatic wire (2)
and chain (3).
1
: Take out the screws (arrows).
– Remove the outer blower
housing (1).
1
: Remove the elbow (1) with
blower tube.
– Check the sealing ring (arrow)
and replace it if necessary
2
– Check the inner blower
housing (1) and replace it if
necessary
– Inspect other components and
transfer if necessary.
– Transfer the blower wheel,
b 10.6
– Transfer the engine, b 4.5
– Transfer the AV springs, b 7
1
SR 430, SR 450