Running The Bist Application - Xilinx Virtex-6 FPGA ML605 Getting Started

Running the BIST Application

Typing any number or character between 1 to D makes the bootloader copy the associated
software application to the external DDR3 SODIMM memory and run it.
10. Type a 1 to start the UART test.
X-Ref Target - Figure 1-11
11. Type a 2 to start the LED test.
X-Ref Target - Figure 1-12
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
Getting Started with the Flash Demonstration
Figure 1-11: 1. UART Test
Figure 1-12: 2. LED Test
www.xilinx.com 17