Now What - Xilinx Virtex-6 FPGA ML605 Getting Started

X-Ref Target - Figure 1-67
The ISE software license is now installed. Click OK on the Success Dialog
close the Xilinx License Configuration Manager.
X-Ref Target - Figure 1-68

Now What?

After following the steps in this Getting Started Guide, you can test the features of the
board using the ML605 Board Diagnostic Flash and PCI Express demonstrations. You now
have a complete and updated installation of the Xilinx ISE Device-Locked to Virtex-6
LX240T FPGA software, and should have been able to open your first project.
Additional resources are located on the ML605 product page at
http://www.xilinx.com/ml605. You are encouraged to check the ML605 Evaluation Kit
home page regularly for the latest in documentation, FAQs, reference design examples,
product updates, and known issues.
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
Figure 1-67: Select the Xilinx.lic file
Figure 1-68: License Installation Successful
www.xilinx.com
Now What?
(Figure 1-68) to
UG525_38_111209
67