Connecting The Cables And Power - Xilinx Virtex-6 FPGA ML605 Getting Started

Connecting the Cables and Power

The steps in this section outline how to connect the cables and power.
1.
X-Ref Target - Figure 1-3
2.
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
Connect one USB Type-A to mini-B 5-pin cables from your PC to J21 on the ML605
board.
Figure 1-3: Connect the Cables and Power
Power on ML605 board for UART Drivers Installation
a. Install the CP210x VCP Win2K/XP/2K3 Drivers Server from www.silabs.com.
Note:
The drivers are also available on the USB flash drive shipped with the board.
www.xilinx.com
Getting Started with the Flash Demonstration
UG533_01_03_061909
11