Transport Robot Arm; Rv-3Sd/3Sdj And Rv-3Sq/3Sqj - Mitsubishi Electric SD Series Installation Description

Transport robot arm

3.2 Transport robot arm
3.2.1

RV-3SD/3SDJ and RV-3SQ/3SQJ

ATTENTION:
E
● Two persons are always required to transport the robot arm. The transport locks must not
be removed before transport.
● Always carry the robot arm at holding points
covers because this may result in damages.
NOTE
Keep the transport locks and their fixing screws in a safe place for any later transport.
Two persons are always required for transport. When transporting, always carry the robot arm at
points
because these may become loose and can destroy the robot arm.
Fig. 3-4: Transport 5-axle robot arm RV-3SDJ or RV-3SQJ
3 - 4
of the base and
Transport
lock
Shoulder
Transport
lock J1
Base
Front view
and
of the upper arm. Never carry the robot at the sides or at its covers
Side view
. Never carry the robot arm at the
Upper
Installation
R001297E