Mitsubishi Electric SD Series Installation Description page 39

Industrial robots
Table of Contents

Advertisement

System overview
No.
µ
¸
¹
Tab. 2-10: Overview of controls on Teaching Boxes R46TB and R56TB (2)
SD-/SQ series
Name
Function
The servos are started by simultaneously pressing the SERVO key and the enable
[SERVO] key
switch. A green LED lights up when the servos are switched on.
[RESET] key
If an error occurs, this is reset by pressing the RESET key.
A limit switch can be ignored in JOG mode by pressing this key. Additionally, this
[CAUTION] key
key can also be used to trigger the brake.
[HOME] key
Is not used here.
Use arrow keys and
[OVRD] key
automatic mode.
[HAND] key
This key calls up the "HAND" screen menu.
[JOG] key
This key calls up the "JOG" screen menu.
The movements of the entry fields accord to the options in the respective screen
[+/ ] key
menu using these keys.
Entries are executed by the robot using this key, e.g. when aligning the hand
[EXE] key
gripper.
[MENU] key
This key calls up the start menu
[RETURN] key
Jump back to the previous menu using this key.
[]-, [ ]-, [ ]-, [ ] key
Move the cursor through the screen menus and entry fields using these arrow keys.
[OK] key
Accept the settings in the current menu or entry field using this key.
[CANCEL] key
Reject the settings in the current menu or entry field using this key.
The multi-grip hand gripper provides for a sure and comfortable grip of the
Multi-grip hand gripper
operator device and is suitable both for right- and left-handed operation.
The three-step enable switch ensures that the user is not exposed to any dangers
during operation. All entries at the operation terminal are only accepted and
executed when then enable switch is held in the middle position. You can feel a
slight pressure point at the beginning After overcoming this pressure point, the
Enable switch
pushbutton can easily be held in the enable position without having to use force.
The third level ("step") of the enable switch, also referred to as the panic position, in
turn guarantees that the enable function is always cancelled in case of an
emergency.
to increase or lower the JOG speed and the speed in
Teaching Box.
2 - 19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents