Handling The Control Unit; Transport Control Unit Cr2D And Drive Unit Du2 - Mitsubishi Electric SD Series Installation Description

Handling the control unit

3.4 Handling the control unit
This section describes the handling and set up of the control unit.
3.4.1

Transport control unit CR2D and drive unit DU2

ATTENTION:
E
Two persons are always required to carry the control unit or the drive unit. To lift, take hold of
the front side and the rear side. Never carry the control unit or the drive unit at their switches or
plug connections.
Fig. 3-9: Transport control units CR2D and drive units DU2
3 - 14
!
!
Installation
R001450E